Product Code: 2-7000039In Stock

Neurotrac Sports XL

$265.00

Four Channel Digital Muscle Stimulator

Four Channel Digital Muscle Stimulator

SKU: 2-7000039 Categories: ,
2 channel NMS stimulator, works like 4 channel (each channel is forked into two pairs of electrodes) Model number: ETS201 - we don't sell to the general public, please obtain the unit from your local distributor   21 preset Sports Programs. Advanced multi-phase programs where treatment is split into time phases with different stimulation parameters   STIM
    • Dual channel: individually isolated circuits.
    • Amplitude: 0-90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
    • Type: Constant Current, maximum output voltage 180 Volts 10 / -30 Volts
    • Waveform: Symmetrical, rectangular bi-phasic with zero DC current.
    • Selectable pulse width: 50 ?S 330 ?S [2% accuracy].
    • Pulse Rate selection: in the continuous mode 2 100 Hz [2% accuracy].
    • Time duration of the treatment selectable: 1 minute to 90 minutes.
    • Low Battery Indicator: If the battery goes below 6.9 volts /- 0.2 volts the battery symbol will flash on/off once every second.
    • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
    • Ramp up time 0.1 - 9.9 seconds.
    • If the battery voltage is below 6.6 ( /- 0.2) volts the unit will not turn on.
  Physical dimensions: 134 x 69 x 29.7 mm. Weight: 0.18 KG with battery. Environmental Conditions for use: 10 to 30 degrees Centigrade. 0-90% Humidity. Environmental conditions for storage & transport: -10 to 50 degrees Centigrade. 0-90% Humidity.
  • Programme : P01 Warm up
  • Programme : P02 Capillary
  • Programme : P03 Endurance
  • Programme : P04 Resistance force output 1
  • Programme : P05 Resistance force output 2
  • Programme : P06 Resistance force output 3
  • Programme : P07 Maximum force output
  • Programme : P08 Explosive force output
  • Programme : P09 Lipocytes Metabolism 1
  • Programme : P11 Muscle at Rest
  • Programme : P12 Mass Muscle Contraction
  • Programme : P13 Active Recovery
  • Programme : P14 Muscle Toning
  • Programme : P15 Calming the Muscle
  • Programme : P16 Pain Relief
  • Programme : P17 Lipocytes Metabolism 2
  • Programme : P18 Explosive Strength Level 1
  • Programme : P19 Explosive Strength Level 2
  • Programme : P20 Explosive Strength Level 3
  • Programme : P21 Explosive Strength Level 4
MF = MODULATED FREQUENCY IN LINEAR STEPS W/R = INTERMITTENT WORK/REST CONT = CONTINUOUS MODULATION TIME = EXPONENTIALLY Example: Modulation time 10 seconds 150?S-250?S:- means starting at 150μS increasing exponentially (fast then slow) to 250μS in five seconds and returning (fast then slow) back to 150μS to complete the cycle in 10 seconds.
You may also like...
Last Viewed
Shop by our brands
WordPress Lightbox Plugin
My Cart close button